Keystone-LaserEngrave.jpg
millers.png

Custom drawer box laser logo etching is offered, which allows the customer to customize their drawer boxes with a company or dealer logo. The default position for the logo is as follows:

 

Located on front inside right

1/2" down from top edge

2” from the inside front

Logos can also be etched on the front outside left and right, and front inside right of the drawer box. Just indicate the location if not the default (front inside Right).

 

The laser etching logo method is the highest quality and most flexible and accurate. There is $45 one time setup charge for a laser etched logo supplied by the customer, plus a charge for each drawer box .

 

The following are steps to get setup for a laser etched logo:

 

The customer will Email us a graphic copy of the logo. Logo or artwork may be sent as an e-mail attachment formatted at 300 dpi in PDF, JPG or Word document. Black and white preferred.

It will be set up in our system and a picture of the logo will be emailed to the customer.

The customer will make corrections (if necessary), and communicate the changes to Ideal Drawer Box.

The customer can request a hard sample of the logo to see how it appears on wood.

We will make any corrections and activate the logo.

Ideal Drawer Box does not compose, design, edit, proof or alter customer supplied artwork.

bread.png
xyz.png
LaserBranding1.gif